Fyrex CI - Heavy Duty Marine Diesel
FIMA engineered Fyrex Ci Marine to meet the demand of heavy fuel oil (bunker fuel) users to meet their responsibilities within the global Emission Control Areas (ECA). ECA established to limit the emission of SOx (Sulphur Oxide), particulate matter and those applicable outside such areas are primarily achieved by limiting the maximum Sulphur content of the fuel oils as loaded, bunkered, subsequently used onboard. These fuel oil Sulphur limits (expressed in terms of % m/m – that is by weight) are subject to a series of step changes over the years.
Fyrex Ci Marine is an ashless liquid fuel additive for Heavy Fuel Oil (Bunker Fuel). It is a multifunctional additive providing powerful sludge dispersant, fuel blend stabilization, anti-corrosive, lubricity and biocidal properties.
By achieving smaller fuel particle size and lowering surface tension, combustion efficiency and fuel economy are improved, also resulting in lower particulate emissions.
Fyrex Ci Marine is an ashless liquid fuel additive for Heavy Fuel Oil (Bunker Fuel). It is a multifunctional additive providing powerful sludge dispersant, fuel blend stabilization, anti-corrosive, lubricity and biocidal properties.
By achieving smaller fuel particle size and lowering surface tension, combustion efficiency and fuel economy are improved, also resulting in lower particulate emissions.
Key Performance Benefits:
Sludge dispersant
Dissolves existing sludge & prevents formation of new sludge.
Detergent
Injector cleaner for optimum spray patterns.
Asphaltenes dispersant
Control agglomeration and precipitation.
Demulsifier
Reduced water entrapment.
Injector cleaner
Increased detergent for optimum spray patterns.
Corrosion Protection
Stops rust & corrosion in engine components.
Surfactant
reduces fuel system wear & maximises engine performance.
Lubricant
reducing friction & wear on engine components.
Biocide
Kills & prevents growth of fungi & bacteria.
Cleans
Reduces particulate emissions.
Protects
Minimises the need for service operators to enter the tank.
Performs
Improves tank capacity by turning sludge into burnable fuel.
Available Packaging Sizes:
250ml
500ml
5 Litre
20 Litre
205 Litre
1000 Litre
Recommended Dosage:
Initial Treatment – Add Fyrex Ci – Marine to fuel storage tank before refuelling.
1 litre Fyrex Marine to 4000 litres heavy fuel oil
(1 : 4000)
For high sulphur, high vanadium & asphaltene fuels the dose rate can be increased to 1 : 2000
For low sulphur, low asphaltene fuels, the dose rate can be reduced to 1 : 8000
1 litre Fyrex Marine to 4000 litres heavy fuel oil
(1 : 4000)
For high sulphur, high vanadium & asphaltene fuels the dose rate can be increased to 1 : 2000
For low sulphur, low asphaltene fuels, the dose rate can be reduced to 1 : 8000
Characteristics:
Appearance:
Clear brown liquid.
Density:
0.88 (water = 1)
Flash Point:
> 68°c
Flammability:
Combustible
Clear brown liquid.
Density:
0.88 (water = 1)
Flash Point:
> 68°c
Flammability:
Combustible
Usage:
Large scale operators such as Heavy Fuel Oil (bunker fuel) users.